GT40s.com - View Single Post

Gary Gibbs · 03-15-04, 08:56 AM

Buzz,
Looks great, and good luck. I agree that the aluminum oil fitting might be a problem. You could run a braided hose right off the block to a remote mount sensor. This is what I did and it worked great. Rember to ground the shell of the sensor to the chassis. Also What are the lines going in the bottom of the trottle bodies on the inside. I assume that is for idle air?

Take it easy,

03-15-04, 08:56 AM	#12 (permalink)
Gary Gibbs CCX33911 10 tenths Join Date: Dec 2001 GT40: Virginia Posts: 1,222 Rep Power: 19	Re: Engine Build Pics for Cannonball Buzz, Looks great, and good luck. I agree that the aluminum oil fitting might be a problem. You could run a braided hose right off the block to a remote mount sensor. This is what I did and it worked great. Rember to ground the shell of the sensor to the chassis. Also What are the lines going in the bottom of the trottle bodies on the inside. I assume that is for idle air? Take it easy,