GT40s.com - View Single Post

mike_starling · 07-22-04, 09:15 AM

Kalun,
Sorry, I did not make myself clear. Wanted the dimensions of the bolt pattern of the transmission joint line where the rear support for the transaxle would be fitted. Can and will make my own adapter, but it's easier if I have a good set of dimensions to check mine.

I have the adapter plate from KEP.

mike

07-22-04, 09:15 AM	#4 (permalink)
mike_starling mike_starling A Tenth Join Date: Jun 2003 Location: 59 years old. Went to college in Florida during the Ford-Ferrari wars. Was a pit steward for the D GT40: WV Posts: 183 Rep Power: 7	Re: bolt pattern dimensions for G50/52?? Kalun, Sorry, I did not make myself clear. Wanted the dimensions of the bolt pattern of the transmission joint line where the rear support for the transaxle would be fitted. Can and will make my own adapter, but it's easier if I have a good set of dimensions to check mine. I have the adapter plate from KEP. mike