GT40s.com - View Single Post

Jim c · 07-31-05, 06:56 PM

Thanks Ron & Peter.

I have read the stories on the fiberglass dust.
I look around my shop & I keep thinking do I want to do that here?.

One thing I did notice by accident I was blowing air inside the tube work to clear the swarf from drilling ect,And rust dust came out of the holes.

I am going to spray with fish oil or extrol through a hose & nozzle.
I cant see it being a problem now but maybe in 10 years or so it will.
Its obviously a natural occurance as the tubes are not painted on the inside.

A very good freind gave me the motivation tool, He has told me this is the color or im not speaking to you again.
The other week he did say he might consider red.

Jim

07-31-05, 06:56 PM	#18 (permalink)
Jim c Jim C Gold Supporter Join Date: Dec 2004 Location: SYDNEY, AUSTRAL GT40: RF 105 Posts: 521 Rep Power: 9	Re: RF105 Thanks Ron & Peter. I have read the stories on the fiberglass dust. I look around my shop & I keep thinking do I want to do that here?. One thing I did notice by accident I was blowing air inside the tube work to clear the swarf from drilling ect,And rust dust came out of the holes. I am going to spray with fish oil or extrol through a hose & nozzle. I cant see it being a problem now but maybe in 10 years or so it will. Its obviously a natural occurance as the tubes are not painted on the inside. A very good freind gave me the motivation tool, He has told me this is the color or im not speaking to you again. The other week he did say he might consider red. Jim