GT40s.com - View Single Post

John Ross · 08-15-05, 11:28 PM

Thanks Bill,

I have a G50/50 sitting on the garage floor. Sent the flywheel and pressure plate back with Kieth to be balanced to the engine. Also have an adapter plate from kennedy and a set of half shafts. Billet adapters for the half shafts already installed on the transaxle.

I'm sure I will have some questions in 3 or 4 months when I try and get it all together. I pretty much have most of the big pieces now but almost none of the little pieces. I got a ways to go.

08-15-05, 11:28 PM	#3 (permalink)
John Ross Ross Gold Supporter Join Date: Jun 2005 Location: Mckinney TX, USA GT40: Sabre Posts: 50 Rep Power: 4	Re: Sabre #16 gets an engine Thanks Bill, I have a G50/50 sitting on the garage floor. Sent the flywheel and pressure plate back with Kieth to be balanced to the engine. Also have an adapter plate from kennedy and a set of half shafts. Billet adapters for the half shafts already installed on the transaxle. I'm sure I will have some questions in 3 or 4 months when I try and get it all together. I pretty much have most of the big pieces now but almost none of the little pieces. I got a ways to go.