GT40s.com - View Single Post

DMatt · 04-03-06, 08:54 PM

I have set my block and transaxle into the frame and I have a couple of questions about the location.

My driveshafts will be offset about 2 1/8" between the transaxle and wheel as it now sets. The transaxle is rearward to the wheel. Is this typical on other RF?

Also, what are you guys using for an oil pan? I'm thinking about the Canton 15-630. Anyone else fit one of these pans into an RF?

http://www.cantonracingproducts.com/...ront_sump.html

04-03-06, 08:54 PM	#1 (permalink)
DMatt Dan Mattingly 2 Tenths Join Date: Dec 2004 GT40: New Slough, Fla Posts: 231 Rep Power: 6	RF Engine/Transaxle location I have set my block and transaxle into the frame and I have a couple of questions about the location. My driveshafts will be offset about 2 1/8" between the transaxle and wheel as it now sets. The transaxle is rearward to the wheel. Is this typical on other RF? Also, what are you guys using for an oil pan? I'm thinking about the Canton 15-630. Anyone else fit one of these pans into an RF? http://www.cantonracingproducts.com/...ront_sump.html