GT40s.com - View Single Post - New A-Arm Kit

**Veek** · 04-30-06, 07:52 AM

As a reference, the original CAV factory settings were:

Castor 4 degrees
Camber front 1/2 degree
Camber rear 1/2 degree
Toe-in front 1/2 degree

I've done a number of laps and based on tire temps, these are pretty close. I tried going to zero on the front toe-in and the squat under hard braking was too unstable over about 140 mph.

04-30-06, 07:52 AM	#16 (permalink)
Veek Bronze Supporter Join Date: Apr 2003 GT40: Florida, USA Posts: 282 Rep Power: 9	Re: New A-Arm Kit As a reference, the original CAV factory settings were: Castor 4 degrees Camber front 1/2 degree Camber rear 1/2 degree Toe-in front 1/2 degree I've done a number of laps and based on tire temps, these are pretty close. I tried going to zero on the front toe-in and the squat under hard braking was too unstable over about 140 mph.