GT40s.com - View Single Post - Alignment Specs

Fran Hall RCR · 11-08-06, 08:43 PM

There is no definitive setting that will work for everyone and every situation ...if there were...all production/race cars would look and drive the same ......and we all know there is no chance of that ........but here is a good place to start for an RCR....your results may vary

Front
Toe in 30 minutes
Camber -20 to -30 minutes
Castor 5-6 deg

Rear
Toe-in 20 minutes
Camber -10 to -20 minutes
Castor 5-7 deg

1 Deg = 60 minutes...

Ride height at Front axle CL 4 1/2 inches
Ride height at Rear axle CL 5 1/2 inches

Hope this helps.....

11-08-06, 08:43 PM	#3 (permalink)
Fran Hall RCR gt40fran Sponsoring Vendor Join Date: Sep 2001 Location: Manufacturer of GT40: Michigan,USA Posts: 2,806 Rep Power: 39	Re: Alignment Specs - Street and Track There is no definitive setting that will work for everyone and every situation ...if there were...all production/race cars would look and drive the same ......and we all know there is no chance of that ........but here is a good place to start for an RCR....your results may vary Front Toe in 30 minutes Camber -20 to -30 minutes Castor 5-6 deg Rear Toe-in 20 minutes Camber -10 to -20 minutes Castor 5-7 deg 1 Deg = 60 minutes... Ride height at Front axle CL 4 1/2 inches Ride height at Rear axle CL 5 1/2 inches Hope this helps..... __________________ FRAN HALL replica manufacturer..... RCR-40..Mk1, 2 and Mk4 RCR-70 Mk3b RCR-70 Spider RCR-P4 Superlite Coupe Superlite Roadster...including Electrolite RCR917 XJ13 for SCF www.RACECARREPLICAS.COM www.superlitecars.com Last edited by gt40fran; 11-08-06 at 08:53 PM.