This weekend I added front brake cooling ducts. I made a bracket that attaches to the front spindle. It's made from a piece of angle aluminum, a piece of sheet aluminum, and 3" brake duct flanges from Richardson Racing Products.
The mounting brackets are attached to the front spindle with three 8-32 SSTL screws and lockwashers. One end of the hose attaches to the bracket on the spindle...
And the other end attaches to a similar flange mounted on the body. The body mount is open in teh front where air passes into the box containing the headlamp and driving lamp. Air flows into the "box", through the duct and to the brakes...
Bill D