GT40s.com - View Single Post

Rick Muck- Mark IV · 02-16-07, 09:59 AM

For the Holley on P1116 we made a rectangular base that approxamated the shape of the Weber tray and a matching lid. We then found a K&N filter about 1.5" tall that was a large circular shape. Some cuts in the edges of the rubber allowed the filter to be re-shaped into a rectangle. Some 90 degree clips on the top and bottom plates help it to hold the shape and VIOLA! A "Weber" look air filter.

Worked quite well and with the rear deck closed everybody thought it had Webers.

Rick

02-16-07, 09:59 AM	#6 (permalink)
Rick Muck- Mark IV Mark IV Silver Supporter Join Date: Sep 2001 Location: W. New York GT40: Formerly P1116 Posts: 894 Rep Power: 15	Re: air filter For the Holley on P1116 we made a rectangular base that approxamated the shape of the Weber tray and a matching lid. We then found a K&N filter about 1.5" tall that was a large circular shape. Some cuts in the edges of the rubber allowed the filter to be re-shaped into a rectangle. Some 90 degree clips on the top and bottom plates help it to hold the shape and VIOLA! A "Weber" look air filter. Worked quite well and with the rear deck closed everybody thought it had Webers. Rick __________________ The GT 40 reunion at the Glen in 1989 was as close to Heaven as I'll get...