[Peter Olliviere]

I sourced my intake through Wayne at Cool Parts so it did not have any RF mods done to it.

I did install the RF style bleed lines to the back of the intake as shown in the picture. I have heard no negative comments about this mod, only that it helps improve engine cooling and here in Florida anything that helps that area is good.

One area that was a slight problem is that DC&O and RF positions the TPS sensor at opposite ends of the intake, RF at the front DC&O at the back both on the same side. I have had to make an extension that allows the RF harness to reach the DC&O sensor location.

Other than those things I noticed no other differances between that unit supplied by RF and the DC&O.

Peter