[Peter D]

These are some pics of the G50 gearshift setup for Henrick.

The original cable setup ran over the top of the gearbox & connected to the top of the boss on the gearbox shift shaft. However, the heat from the CAT's melted the cable sheath, so I ran the new cable along the side of the gearbox & connected it to a bracket on the end of the boss's lever.

To stop any bending of the lever fore & aft, I welded a strengthening plate across the top of the lever & boss.

It all seems to work fine, & no melted cables !

Henrick, let me know if you need any more pics, etc.

Kind Regards,

Peter D.