GT40s.com - View Single Post - Quick release for a Moto-Lita steering wheel

Jim Dewar · 03-29-07, 08:38 PM

Hi Mark, I recently modified my same wheel(last Month). I ordered a fine spline quick release hub from Summit Racing and enlarged the splined hole. Then drilled the mating holes through the modified hub being carefull to center. Then removed (chop saw)the threaded portion of the steering shaft and welded the male splined portion of the quick release. Works beautifully!
I can provide more details if you like. Regards, Jim

03-29-07, 08:38 PM	#15 (permalink)
Jim Dewar swede30 Jim Dewar Join Date: Apr 2004 Location: NC USA GT40: RF 103 Posts: 172 Rep Power: 6	Re: Quick release for a Moto-Lita steering wheel Hi Mark, I recently modified my same wheel(last Month). I ordered a fine spline quick release hub from Summit Racing and enlarged the splined hole. Then drilled the mating holes through the modified hub being carefull to center. Then removed (chop saw)the threaded portion of the steering shaft and welded the male splined portion of the quick release. Works beautifully! I can provide more details if you like. Regards, Jim __________________ Jim Dewar RF #103 C2 997 S K 1200 GT