GT40s.com - View Single Post

Jim c · 04-24-07, 04:45 PM

Peter

You need to have leads made with a suppression core(silicon outer and carbon type core).

I have had plenty of lead sets made and have never asked what resistance the cable is.

I have had no issues with interferance or breakdowns ect ect and these have been on mainly turbo engines that run higher cylinder pressures than N/A.
Heres an link to the brand I use here in OZ.
bIhttp://www.rocketindustries.com.au/search.php?brand=EAGLE+LEADS&menu=Ignition
Just dont use copper.

A lead manufacture will supply terminals but my advice make them up out of rope or an old set of leads to get your lengths send them to the manufacturer tell them what terminals you want(get them to fax a pic of the ends to confirm) and have them make them.
You need a special crimp tool to fit the terminals you can buy 3 -4 sets of leads for the price of the tool.
Just my 2c worth.

Jim

04-24-07, 04:45 PM	#2 (permalink)
Jim c Jim C Gold Supporter Join Date: Dec 2004 Location: SYDNEY, AUSTRAL GT40: RF 105 Posts: 496 Rep Power: 8	Re: Resistance!! Peter You need to have leads made with a suppression core(silicon outer and carbon type core). I have had plenty of lead sets made and have never asked what resistance the cable is. I have had no issues with interferance or breakdowns ect ect and these have been on mainly turbo engines that run higher cylinder pressures than N/A. Heres an link to the brand I use here in OZ. bIhttp://www.rocketindustries.com.au/search.php?brand=EAGLE+LEADS&menu=Ignition Just dont use copper. A lead manufacture will supply terminals but my advice make them up out of rope or an old set of leads to get your lengths send them to the manufacturer tell them what terminals you want(get them to fax a pic of the ends to confirm) and have them make them. You need a special crimp tool to fit the terminals you can buy 3 -4 sets of leads for the price of the tool. Just my 2c worth. Jim __________________ Occupation Automotive Interests are Fabrication and design Building my car Sydney Australia www.mentalperformance.com.au Last edited by Jim C; 04-24-07 at 04:55 PM.