GT40s.com - View Single Post

Jeff Hamilton · 04-30-07, 10:28 PM

After setting the motor in I needed 3 1/16" spacers from the rear cross member to the adapter plate. This also required longer bolts (5/8" bolt 10" long) that Ace had in stock.

04-30-07, 10:28 PM	#2 (permalink)
Jeff Hamilton Jeff Hamilton Bronze Supporter Join Date: Dec 2005 Location: Ohio GT40: RCR Posts: 90 Rep Power: 3	Re: Jeff's RCR40 After setting the motor in I needed 3 1/16" spacers from the rear cross member to the adapter plate. This also required longer bolts (5/8" bolt 10" long) that Ace had in stock.