GT40s.com - View Single Post

Chris Coote · 06-01-07, 08:02 AM

Run some masking tape around the hose.If you have an old brick bolster give it a bit of a sharpen.Lay the hose on a bit of flat aluminium plate.2 lb hammer and dont miss the bolster or it hurts your hand.In 2 quick hits it is through and the hose is not splayed.Made hundreds this way. Cheers.

06-01-07, 08:02 AM	#14 (permalink)
Chris Coote RF054 Gold Supporter Join Date: Jan 2005 GT40: Sydney Australi Posts: 39 Rep Power: 4	Re: How cut braided fuel hoses Run some masking tape around the hose.If you have an old brick bolster give it a bit of a sharpen.Lay the hose on a bit of flat aluminium plate.2 lb hammer and dont miss the bolster or it hurts your hand.In 2 quick hits it is through and the hose is not splayed.Made hundreds this way. Cheers.