GT40s.com - View Single Post

FRPGUY · 06-02-07, 09:28 AM

Chris, It's going to be a little tight to get the front screws in. You will need a tiny screw driver to clear the windshield glass. The original grills had little clips that hung down and forward that slid into holes making the install easy. Is Mark making these available to anyone?

06-02-07, 09:28 AM	#137 (permalink)
FRPGUY FRPGUY 3 Tenths Join Date: Jan 2006 GT40: Norwell, Mass. USA Posts: 374 Rep Power: 6	Re: 1st MDA to Canada Chris, It's going to be a little tight to get the front screws in. You will need a tiny screw driver to clear the windshield glass. The original grills had little clips that hung down and forward that slid into holes making the install easy. Is Mark making these available to anyone? __________________ may no resin cure before it's time