[Ron Earp]

The other one he built did fine on pump gas as it was required for the build competition. It is a tad bit less than 11:1 actually, can't remember the measurements exactly but I'll see if they are in the notes - remember about 10.7 or thereabouts. Anyhow, with aluminum heads and a good combustion chamber design that seems to not be an issue. I'll correct that in the specs as it is not quite 11 to 1 anyhow, I rounded up, and don't wish people to be worried about that. It'll do pump gas as that was a specification for the build as well.

Ron