[Bill Musarra]

Was installing the tea strainers on my TWM injectors. I kept thinking how to attach them. I was considering safety wire, but didn't want to have the twist exposed to catch the fingers when adjusting the linkage etc. Didn't like the glue or calking idea. Then It came to me once I had removed the retainer with a dremel tool. The hole is the same size as a small rivet. Popped a hole on the oposite side and it was an easy attachment. The rivet is probably a 1/4" lenght grip, which is probably longer than needed. I had rather be a little long than short with these. If it works loose it won't come completely off. The TWM units have a full roll at the lip and the rivet is hidden from view.

Bill