GT40s.com - View Single Post

CraigB · 08-21-07, 11:23 AM

Well Huddart engines dropped off my engine to MDA yesterday (20th August), Mark took some photos and emailed them up to me this morning. Work will start now on the 930/FE adaptor in the next few days.

Intake

Engine from the left

Engine from the right

Engine from the front

Engine from the rear

The engine is also supplied with The MSD control box, Aviad dry sump tank and a 750cfm Holley and filter

The dyno results are also in

560bhp at 6000rpm
580ft/lb at 4000 rpm

I think changing gear will be strictly optional around town

08-21-07, 11:23 AM	#11 (permalink)
CraigB CraigB Bronze Supporter Join Date: Jun 2006 Location: Lancs., UK GT40: MDA Mk.II Posts: 144 Rep Power: 4	Re: MDA Mk.II FE engined build Well Huddart engines dropped off my engine to MDA yesterday (20th August), Mark took some photos and emailed them up to me this morning. Work will start now on the 930/FE adaptor in the next few days. Intake Engine from the left Engine from the right Engine from the front Engine from the rear The engine is also supplied with The MSD control box, Aviad dry sump tank and a 750cfm Holley and filter The dyno results are also in 560bhp at 6000rpm 580ft/lb at 4000 rpm I think changing gear will be strictly optional around town __________________ Cheers Craig MDA Mk.II with 452ci FE and 930 transaxle in build Build site at www.MDAmk2.com Last edited by CraigB; 08-21-07 at 11:29 AM. Reason: Havn't learnt to type yet :(