GT40s.com - View Single Post

Jim c · 11-22-07, 01:32 AM

Mike

Randy has a point about the cap, it should not pass
It lives in a 14mm counter bore with a 10.2 to 10.5 mm hole for the pintle to pass through.
The brim on the cap should sit in the bottom of the counter bore.
Is that the case with your manifold.

You are better of with the bosch anyway.
The Venom spray pattern droplete size is to large in all the ones I have seen.

Jim

11-22-07, 01:32 AM	#4 (permalink)
Jim c Jim C Gold Supporter Join Date: Dec 2004 Location: SYDNEY, AUSTRAL GT40: RF 105 Posts: 534 Rep Power: 9	Re: Venom/ Python injector defective Mike Randy has a point about the cap, it should not pass It lives in a 14mm counter bore with a 10.2 to 10.5 mm hole for the pintle to pass through. The brim on the cap should sit in the bottom of the counter bore. Is that the case with your manifold. You are better of with the bosch anyway. The Venom spray pattern droplete size is to large in all the ones I have seen. Jim __________________ Occupation Automotive Interests are Fabrication and design Building my car Sydney Australia www.mentalperformance.com.au Last edited by Jim C; 11-22-07 at 01:38 AM.