GT40s.com - View Single Post - C5FE-B rods

Jac Mac · 11-23-07, 02:54 PM

Bob, as Jay( Cushman Comp) has pointed out there is a different tang location on the brg shells for the 255 or 302 rods-the 10-1972 code on your brgs would tend to indicate yours may be for the later rods. I only have pn for Boss type rods/brg's so wont confuse the issue with those. The pin bush if fitted with them can be replaced with the bush from a 272/292/312 Y-Block to bring it back to the SB Ford size of .912" from .975".

Jac Mac

11-23-07, 02:54 PM	#5 (permalink)
Jac Mac jac mac 10 tenths Join Date: Dec 2005 Location: Gore N.Z. Posts: 1,476 Rep Power: 19	Re: C5FE-B rods Bob, as Jay( Cushman Comp) has pointed out there is a different tang location on the brg shells for the 255 or 302 rods-the 10-1972 code on your brgs would tend to indicate yours may be for the later rods. I only have pn for Boss type rods/brg's so wont confuse the issue with those. The pin bush if fitted with them can be replaced with the bush from a 272/292/312 Y-Block to bring it back to the SB Ford size of .912" from .975". Jac Mac