[Jason Ferraro]

Thanks for those dimensions Mark.

If anyone else could tell me the front and rear track of an RCR40 with 10.5" wider rears (& +2 rear arms) and 8.0" wide fronts I would be most grateful. That is measured from the outside of the tyre bead.

Just a very rough 30 minute CAD model to design the smallest enclosed trailer that will allow me to get out of the car! I'm thinking of making the trailer quite narrow with a door on the side to allow me to get out on the drivers side. Depends on the height of the door from the ground as it will need to clear the trailer wheels/guard to open.

Thanks

Jason