I'm embarking on a custom trailer build for a my RCR40 that is due in a few months. The trailer will be enclosed however the car I will pull all this with has a maximum towing capacity of 2,100kg. I need to make the trailer as small and light as possible. My towing vehicle is a new 4 door sedan with a 310KW 6.0Lt V8 so I will easily get up hills but I will pull the trunk off it if I exceed this weight!!
I would appreciate it if a current RCR owner with +2 rear flares could tell me the measurements below.
I know there are many lists of common dimensions like wheelbase etc. but I just want to make sure. DIM A is probably the only different one.
Dim A = ?
Dim B = ?
Dim C = ?
Dim D = ?
Front track (width) = ?
Rear track (width) = ?
Height from the bottom of the door to the ground when it is open = ?
I know I could try Fran but his email is pretty full at the moment and calling from Australia is too late at night.
Thanks in advance
I would appreciate it if a current RCR owner with +2 rear flares could tell me the measurements below.
I know there are many lists of common dimensions like wheelbase etc. but I just want to make sure. DIM A is probably the only different one.
Dim A = ?
Dim B = ?
Dim C = ?
Dim D = ?
Front track (width) = ?
Rear track (width) = ?
Height from the bottom of the door to the ground when it is open = ?
I know I could try Fran but his email is pretty full at the moment and calling from Australia is too late at night.
Thanks in advance