View Single Post
Old 02-07-08, 08:35 PM   #2 (permalink)
minerl's Avatar
minerl
Moderator
United States
 
Join Date: May 2005
Location: Chewelah, WA
GT40: SPF P2133
Posts: 176
Rep Power: 5 minerl has a spectacular aura about
Re: Fastest Production Car Is Now In USA!!!

Kalun D

Just a couple quick comments about running the Salt Flats. I am certainly no authority on this but last fall I checked into taking my 40 down to Speed Week to see what it would do. I contacted the club in California that has control of Bonneville and spent quite a bit of time talking to the Tech Official. These are the guys that let you run. What he said was: any car over 200mph required 4 things in addition to the obvious need to be mechanically sound.

You need:
Speed rated tires (no brainer there)
An automatic fire suppression system (not too big a deal)
A parachute (again, not too big a deal)
A full certified roll cage (that was the killer for me)

There are lots of pictures and ideas on this site on how to do a roll cage but the type spec'd in the Speed Week rule book either needs to be built with the chassis or effectively destroy the body getting it in after the body is on. It needs to be all welded and basically one large chunk of iron.

So much for a 200+ mph run at the flats (at least for me).
__________________
Lynn
minerl is offline   Reply With Quote