GT40s.com - View Single Post

Nick · 02-09-08, 05:56 PM

Hi all,

Thanks for all your help. everything seems to have fallen in place now, I thought I had it worked out but wanted to double check. Now arranging the pistons with the chamfer as described ans as per Jac Mac's diagram I have all the numbers on the conrods facing inwards which is what I was after.

Funnily enough the F's stamped on the side of my new pistons all face forwards towards the distributer end now as well!!!

Regards

Nick

02-09-08, 05:56 PM	#6 (permalink)
Nick Nick Brough Rookie Join Date: Apr 2006 Location: Warrington UK GT40: ford 351W G50 Posts: 66 Rep Power: 3	Re: 351W engine rebuild advice Hi all, Thanks for all your help. everything seems to have fallen in place now, I thought I had it worked out but wanted to double check. Now arranging the pistons with the chamfer as described ans as per Jac Mac's diagram I have all the numbers on the conrods facing inwards which is what I was after. Funnily enough the F's stamped on the side of my new pistons all face forwards towards the distributer end now as well!!! Regards Nick