Quote:
Originally Posted by jac mac  That might also partly explain the Head gasket problems you had- have you checked that the rotor is correctly phased to the towers of the cap, just in case the previous owner had phased them to his incorrectly wired MSD & now that you have corrected the MSD-well you know what I mean.  |
I know what you mean, but we're good there. My timing was sorted before Roebling and that was a simple belt failure. Removed the head, checked for square, put it back on and never changed a thing. She's done five hours since then, pulled in a second place in a 1.5 hour mini enduro too, so she's ok in that department.