GT40s.com - View Single Post

Eric Johnson · 03-07-08, 02:13 PM

Tony,

Thanks.I have taken the wheel off and have indeed determined it is leaking at the union of the two halves of the wheel.It looks like there is a thin gasket sandwiched between. I don't know if it isponsor an Image wheel.The wheel does have "GTD" and " GT Developments stamped on the inside facing of the wheel. I will look further tonight when I return home. In the alternative, I have contacted Vintage Wheels (GT40s sponsor) and have inquired about possibly going to 5 pin drive Halibrand style with bolt on adapters.Does anyone have any experiences with thier product ? Pros? Cons?

Thanks for your help.

03-07-08, 02:13 PM	#3 (permalink)
Eric Johnson 550spydr 2 Tenths Join Date: May 2006 Location: Millbrook,NY GT40: GTD Posts: 208 Rep Power: 5	Re: GTD 2 piece wheel gaskets? Tony, Thanks.I have taken the wheel off and have indeed determined it is leaking at the union of the two halves of the wheel.It looks like there is a thin gasket sandwiched between. I don't know if it isponsor an Image wheel.The wheel does have "GTD" and " GT Developments stamped on the inside facing of the wheel. I will look further tonight when I return home. In the alternative, I have contacted Vintage Wheels (GT40s sponsor) and have inquired about possibly going to 5 pin drive Halibrand style with bolt on adapters.Does anyone have any experiences with thier product ? Pros? Cons? Thanks for your help. __________________ Eric Johnson