GT40s.com - View Single Post

Dave Peterman · 03-15-08, 10:07 PM

After the side pods were tacked together I clamped the side pods in postion on the jig. I laid the front snout portion of the chassis in place to get an idea of available leg room. I have opted for a tapered foot box area simular to the KVA chassis but my lower frame rail is 3" x 1" x.125 wall tube. I only have a few more days to use the welder here at work as we are getting ready to install my last fabrication project our brake dyno.

03-15-08, 10:07 PM	#16 (permalink)
Dave Peterman RacerDave Bronze Supporter Join Date: Dec 2007 Location: North Carolina GT40: scratch build Posts: 109 Rep Power: 2	Re: Good bye Locost 7 Hello GT40!! After the side pods were tacked together I clamped the side pods in postion on the jig. I laid the front snout portion of the chassis in place to get an idea of available leg room. I have opted for a tapered foot box area simular to the KVA chassis but my lower frame rail is 3" x 1" x.125 wall tube. I only have a few more days to use the welder here at work as we are getting ready to install my last fabrication project our brake dyno. Attached Thumbnails __________________ Speed is never a question of how Fast you want to go, but how much you want to spend to go Fast.