GT40s.com - View Single Post - Mark Reid RCR-40 Build

MReid · 04-22-08, 11:33 AM

I also need to adjust the front caster. In order to get it close enough for fine tuning, I need to move about 3/4" of shims from in front of the bottom control arms to behind the lower control arms, effectively moving the front wheels further forward a little bit. This will center the wheels even more.

04-22-08, 11:33 AM	#163 (permalink)
MReid MReid 4 Tenths Join Date: Apr 2007 Location: Connecticut GT40: RCR Mk1 Posts: 474 Rep Power: 6	Re: Mark Reid RCR-40 Build I also need to adjust the front caster. In order to get it close enough for fine tuning, I need to move about 3/4" of shims from in front of the bottom control arms to behind the lower control arms, effectively moving the front wheels further forward a little bit. This will center the wheels even more. __________________ Have fun with your build! - Mark FFR Daytona Coupe RCR Gt40 Mk1 in the garage, and underway!