GT40s.com - View Single Post

Clayton · 06-23-08, 08:42 AM

Hi Troy
My cross member is 530mm back from the bulkhead (65 x 35mm RHS) to the front edge. And 205mm from the bottom of the chassis to the top of the cross member.
Had to make it a triangle cross section to clear the rear clip and a cut out for the gearbox as well. Can’t remember how much it moved from the original position though.

Clayton

06-23-08, 08:42 AM	#52 (permalink)
Clayton otto69 A Tenth Join Date: Sep 2001 Location: NT Australia GT40: RF40 # 66 Posts: 154 Rep Power: 9	Re: Troy's RF "Race" Chassis Hi Troy My cross member is 530mm back from the bulkhead (65 x 35mm RHS) to the front edge. And 205mm from the bottom of the chassis to the top of the cross member. Had to make it a triangle cross section to clear the rear clip and a cut out for the gearbox as well. Can’t remember how much it moved from the original position though. Clayton