GT40s.com - View Single Post

Mesa · 07-20-08, 12:41 AM

Hey Will,
I was going to call you earlier but it still would have been after 10 your time (too late). There isnt enough downward shock travel (droop) to use the hydro spring perch idea, you wouldnt get enough lift. A change of shock might fix this, I'll call Cillian's suggestion next week and see what that brings.

BTW: Your roller wheels don't have enough caliper clearance front OR rear to work on the SLC ! I guess that's the reason the calipers were not bolted in place for the trip out.

07-20-08, 12:41 AM	#5 (permalink)
Mesa Mesa 4 Tenths Join Date: Dec 2005 Location: Santa Clara, Ca GT40: SLC 001 Posts: 414 Rep Power: 7	Re: SLC 001 Build Hey Will, I was going to call you earlier but it still would have been after 10 your time (too late). There isnt enough downward shock travel (droop) to use the hydro spring perch idea, you wouldnt get enough lift. A change of shock might fix this, I'll call Cillian's suggestion next week and see what that brings. BTW: Your roller wheels don't have enough caliper clearance front OR rear to work on the SLC ! I guess that's the reason the calipers were not bolted in place for the trip out.