GT40s.com - View Single Post - Source for locking pin for pin drive adaptor

Phil · 13th July 2012, 09:41 AM

Gents:
I have taken measurements and the wire I initially used is 3/32 (.093) and it looks to be stiff enough to do the job.
I will try to do a few trials with some 3/32 filler rod and see what happens and we can proceed from there.
Cheers
Phil

13th July 2012, 09:41 AM	#21 (permalink)
Phil Phil 8 Tenths Join Date: Feb 2004 Location: New Jersey GT40: Mk1B Posts: 866	Re: Source for locking pin for pin drive adaptor Gents: I have taken measurements and the wire I initially used is 3/32 (.093) and it looks to be stiff enough to do the job. I will try to do a few trials with some 3/32 filler rod and see what happens and we can proceed from there. Cheers Phil __________________ Scratch Built Spaceframe, 289, Pin Drives, ZF Box