View Single Post
Old 13th June 2017, 03:35 AM  
saxoncross's Avatar
saxoncross
8 Tenths
United Kingdom
 
Join Date: Mar 2007
Location: Norfolk, UK
GT40: Tornado
Posts: 851
Re: GTD throttle cable re-routing

Hi Dave,
Iíve routed mine actually inside the chassis tube that runs along the drivers sill and then is routed up the bulkhead. I set the pedal end up so it a direct straight pull on the cable. You want to run the largest bend radii possible to minimise any internal friction and protest the cable from the heat. The cable doesnít have to be anything special (although I would use a low friction liner) if you minimise the length and maximise the bend radii.
Rgds,
Andy
Attached Thumbnails
GTD throttle cable re-routing-40-throttle-cable-run-jpg  
__________________
Failure is not an option, but cock-ups will happen
saxoncross is offline   Reply With Quote