Howard Jones
Supporter
Listen to Jac and build a 351 with standard bore and stroke. Reuse the crank and rods, new 30 over pistons, and edelbrock #60255 Performer RPM Cylinder Heads. Call Comp Cams and talk to their tech. guy and tell him you want 400 HP on pump gas with a medium hot hyd roller cam. Put a RPM performer intake and a 750 Holley DP on and drive it forever because that's how long it will last.
Or: Just do this...........
ATK High Performance Ford 351W 385HP Stage 3 Crate Engines HP11C - Free Shipping on Orders Over $99 at Summit Racing
Here's a bit more info from their website on the "mid dress option".
Ford 351W Mid Dress Engine 385HP
IMHO you can build you own with the CNC Ported RPM performer Edelbrock heads, raise the compression to a 10.5 to one, add some ARP rod bolts and good balance job and you should be right at 400 HP for less than $6500 with a little sweat equity.
Like I said, it will last forever.... if you keep it under 6500RPMs.
Or: Just do this...........
ATK High Performance Ford 351W 385HP Stage 3 Crate Engines HP11C - Free Shipping on Orders Over $99 at Summit Racing
Here's a bit more info from their website on the "mid dress option".
Ford 351W Mid Dress Engine 385HP
IMHO you can build you own with the CNC Ported RPM performer Edelbrock heads, raise the compression to a 10.5 to one, add some ARP rod bolts and good balance job and you should be right at 400 HP for less than $6500 with a little sweat equity.
Like I said, it will last forever.... if you keep it under 6500RPMs.
Last edited: