GT40s.com - View Single Post

Chris Melia · 06-13-03, 04:10 AM

Howard

the V6 fly wheels were modified to the Ford Bolt pattern at the crank then balanced for the common 28 oz motor.
I made my own fly wheel from steel and had it balanced as an assembly for my 28 oz motor. It needed over 70 grams adding and a few lightening holes drilling to achieve balance.
There is just no compromise on this.

Regards
Chris

06-13-03, 04:10 AM	#8 (permalink)
Chris Melia 10 tenths Join Date: Sep 2001 Location: UK GT40: England Suffolk Posts: 1,688 Rep Power: 24	Re: Question of ballance? Flywheel. Howard the V6 fly wheels were modified to the Ford Bolt pattern at the crank then balanced for the common 28 oz motor. I made my own fly wheel from steel and had it balanced as an assembly for my 28 oz motor. It needed over 70 grams adding and a few lightening holes drilling to achieve balance. There is just no compromise on this. Regards Chris