GT40s.com - View Single Post - Gurney-Weslake Valve Covers

Chris Melia · 06-23-03, 08:15 PM

Hi guys thanks for your patience
Latest info on the valve covers, is that the first heat treated sample cover is a complete success. I will be getting it machined in the next seven days, then will start the first production run of 100 covers.

I will post a photo as soon as I can after machining.

At the moment I am going to stick to the small block cover as the tooling cost was quite high but will see how we go.
Regards
Chris.

06-23-03, 08:15 PM	#45 (permalink)
Chris Melia 10 tenths Join Date: Sep 2001 Location: UK GT40: England Suffolk Posts: 1,688 Rep Power: 24	Re: Gurney-Weslake Valve Covers Hi guys thanks for your patience Latest info on the valve covers, is that the first heat treated sample cover is a complete success. I will be getting it machined in the next seven days, then will start the first production run of 100 covers. I will post a photo as soon as I can after machining. At the moment I am going to stick to the small block cover as the tooling cost was quite high but will see how we go. Regards Chris.