17 Inch BRM copys

Howard Jones · 04-27-03, 02:49 AM

While I was down in LA area a few weeks ago I stopped in to talk to Phil Schmit at PS engineering. I wanted to ask him if the BRM knockoffs he make are available in 17 inch sizes. We talked awile and he asked me to call him back when I got home. I just called him this last week and he agreed to make me a set of 17 inch wheels. We agreed on a price of $2400 for the set including the hub adapters and knock on spinners. I asked him if it would be ok to put this on this forum and he agreed. He said it would take a couple of months to change the casting of the centers so I'll update this as I get more information. PS Engineering 310-534-4477

Bigend · 04-27-03, 05:03 AM

Hi, next time you are talking to Phil Schmidt, could you please tell him that I am very interested in a set of 17" BRM wheels too.
Many thanks.

Howard Jones · 04-27-03, 12:55 PM

It might be of help for those that want more infomation to write Phil at:

PS Engineering
2675 Skypark Dr. #102
Torrance CA. 90505

PS: I will let him know that there is an interest in this from a few people. I plan to talk with him about once a month on this project. Depending on the progress I will ask about a list of people or how and when he might want to proceed. I should say at this point that I have no busness interest, other than my order, with Phil or PS Engineering.

[ April 27, 2003: Message edited by: Howard Jones ]

Gregg · 05-05-03, 07:23 PM

I am glad Phil finally decided to produce the BRM in 17". I've been asking him to do that for over a year. I'm glad I didn't buy wheels yet. Put my name on the list of those interested in buying a set.

Howard Jones · 05-16-03, 07:31 PM

yes they do make 15" BRM's. The Ph # is correct you must keep trying. No website

mlhereford · 05-17-03, 01:59 AM

Howard,

Does that mean PS Engineering makes a 15" BRM wheel? Please let me know. I can't seem to get through to him using the number you provided and I can't find him on the internet.

Thanks for you help. [img]images/icons/smile.gif[/img]

Neal · 05-17-03, 11:16 AM

I have a set of Phil's 15" BRMs on Trigo pin-drive adapters. His work speaks for itself. Remain persistant as he can be difficult to reach...

Bob Lacey · 05-21-03, 12:54 AM

For anyone who may be interested CAV can supply 15 x 10 and 15 x 8 BRM wheels as now supplied on our CAVGT for $2200 per set including adaptors.
Bob lacey (858) 342 3246

Brian · 05-21-03, 08:23 AM

Bob, I have put myself in the cue with Howard for a set of P & S wheels. However it may be of help if you could provide other forum members with some additional information.
- Are the wheels five pin drive or six?
- Are the offsets fixed? If so, what are they? Can the offset be varied by machining the back of the wheel?
- Can they be purchased without the pin holes drilled?

Thanks
Say hi to Joe for me
Brian

Howard Jones · 06-09-03, 04:06 AM

I spoke to Phil last friday 6-7-03 and the 17" BRM project is still on track for completion this summer. I am not sure how to order a different backspaceing/offset or a lug nut type wheel. I have ordered pin drive(5pin trigo) types drilled to fit a GTD. Phil has started a file on this order and has begun putting others requests, letters of interest in it. You might want to review this thread for his address/ phone number and get in touch with him directly. I will update this thread about once a month or as I have some more information.