Peter Delaney
GT40s Supporter
Guys, I am going to replace my old uni / sliding spline shafts with new CV based shafts. The old shafts have too much play - about 10mm movement at the tyres with the inner ends locked.
Thanks to Dimi, I have a beautiful set of new CNC billet spindles with the Commodore flange & the Corvette splines, etc, so all I now need is the correct Commodore driveshafts.
And that is my problem - I understand that they are from a VS Commodore, but investigations to date seem to indicate that there were 2 different versions of driveshafts for the VS.
So, does anyone know exactly which ones should be used (and how to identify / specify them) ?
Any sources of reconditioned shafts would also be greatly appreciated.
Thanks & Kind Regards,
Peter D.
Thanks to Dimi, I have a beautiful set of new CNC billet spindles with the Commodore flange & the Corvette splines, etc, so all I now need is the correct Commodore driveshafts.
And that is my problem - I understand that they are from a VS Commodore, but investigations to date seem to indicate that there were 2 different versions of driveshafts for the VS.
So, does anyone know exactly which ones should be used (and how to identify / specify them) ?
Any sources of reconditioned shafts would also be greatly appreciated.
Thanks & Kind Regards,
Peter D.