- New engine for the SLC
- Water pump
- slc headlights
- Awsesome build thread
- Todd's SLC build
- ISIS Power Parasitic Draw
- Car cover for the SLC?
- Rear hubs
- LS crate motor wiring harness modifications
- Order of Operations?
- "The Plan"
- Cold air intake (race only)
- "tried & true" fuel delivery systems for the track
- Fuel Pump
- Car Audio speakers
- New welder
- Selling my SLC package
- Rev Nuts
- Rapier SLC "on the road" YouTube video
- Version 2.2 of the SLC Build Manual now available
- Firewall thickness
- Fling SLC Build Thread
- Sound Deadening Materials
- Cracked Windshield
- Front and rear antiroll bar values?
- Gear ratios
- Mufflers- LS3
- H1v8 ? And hi
- Utcc 2013
- Audi Transaxle and Half-Shaft Angles
- New carbon wheels for the SLC?
- With mixed feelings, it's gone.
- Inner Fender Splash Shields
- Accusump?
- Seat belt/shoulder harness?
- New powerplant for the SLC
- Rear wing
- Camber & Rod End Adjustment
- Engine Options
- SL-C Hinged Window Question
- SL-C ABS Feasibility Question/Discussion
- Brembo caliper fittings questions.
- LeMans pic on the Facebook page- Fran- do you mind if I post pictures I took of it?
- Preliminary dyno results for my SLC's engine
- Performance specs for various SL-C builds and the engine / transmissio combos used...
- Engine Mounts for LS series- are they the same for LS3, LS7, LS9, etc.?
- SLC ISIS questions
- Another SLC first impression
- A Few Specific Questions For An SL-C Build
- Craig's SLC
- Anodized Chassis
- Rear bellcrank bolt torque spec?
- Wiper installation help.
- Bang....pulled the trigger today!
- Paddle shifting options...
- Rear-View Mirrors on an SL-c
- Daily driver
- Any owners in the Philadelphia area?
- Mike S. SLC
- LS3 spec ?
- W8 and Corvette Transaxle?
- Wanting to see an SL-C
- Securing the front clip?
- How high is your steering wheel?
- KOZO RX-2N GP Gauge
- How to do rear alignment?
- An SL-C is in my future
- Resistor help
- Dyno tuning questions
- Ricardo gearing
- 2013 Daytona 24 Hour get together
- Alex is more stoopid now =(
- Gauge Cluster Signals
- 388 views and no one asked the obvious!
- SL-C panels done in carbon fiber...
- Traction control sensor mounting
- A long time coming
- Headlight installation help needed
- #18 SLC Eagle racing at 25hr Thunderhill
- Never Seen A 3 Rotor Before
- Grant's SL-C Build tread
- Ricardo shifter cable mounting bracket
- Back to the QR discussion
- Warped dash - solutions?
- Inner door pulls?
- Looking for wire covering
- taillights
- Theoretical question for Fran (and others)
- "settled down for a long winters nap...."
- Anybody in tucson,phoenix?
- Wheel arch lip?
- Razor Delivery
- Steering column alignment
- Help me find a mystery part
- Ricardo clutch cover?
- Build Manual
- inner wheel wells
- Fuel sender unit?
- Where to strap down on the dyno?
- Protecting underside fiberglass from rock impacts?
- Emergency Brake actuator
- Front air ducting
- SLC in Bolton?
- Cooling system help - leaking out of the cap?
- Charge of the Headlight Brigade- The whole story
- Gentleman Trim Their Wing-Tips
- It lives! (but no tach :/ )
- Dean's In car video from Run n Gun
- Dean's SLC at Run and Gun
- ISIS, digidash, and Ricardo starter
- Hydraulic lift question
- Start engine w/o serpentine belt?
- New and won-over
- Ken's SLC build thread
- Steering wheels
- Some new paint on ole #02
- Lower Front Door Hinges
- ETC extension cable
- Feedback: Considering VW R32 with DSG for SLC
- Horn and lift controls
- Driver lineup for the Charge of the Headlight Brigade
- Roll Cage Mounting
- Team Quick Racing Products
- SLC 2nd drive
- Name that part
- Air intake pictures
- SLC Match Box Car or Diecast
- Is an i terior worth the weight?
- Jacket for shifter cables
- Subaru gearbox in SLC?
- What a/c system is being used?
- Has any one looked at or used MiMod HP system?
- Roof scoop used for a cold air intake for the engine.
- Rear exhaust
- New Stacey David video from Gearz
- SLC Performance Figures
- Glamour Shots
- G50/03 for a street RCR?
- Perpetually leaking wilwood reservoirs?
- Found the intake and exhaust I will be getting
- Caster/camber/toe?
- A few photos of my car
- Flat Plane Crank LS1
- SLC wheel choices
- Running at Putnam Park in two weeks
- Steering Column Wiring
- Lifting engine by valley cover?
- Muffler
- I'm sorry if its on here but I cant find it. What motor was used in the slc racecar?
- Rumbles SLC Build
- Thinking about painting my car
- First day of sorting out the new SL-C
- SLC Windshield Cut-Out
- Brake install help
- Bench bleeding master cylinders in the car
- engine bay heat
- My SLC visit
- SLC fit for tall people
- Source for master cylinder reservoir level Switch?
- GMPP wiring harness
- -- Finished Builds --
- Oil Cooler Size?
- SL-C inner door release handles
- Where the money Goes
- SL-C door hinges
- Crazy idea for SLC: Teardrop trailer?
- LS/Ricardo flywheel and clutch install?
- LS3 install questions
- One of you, one of you
- SL-C Air Box
- What drivetrain are you using?
- Dry Sump Tank
- Six Rotor Wankel for you Rotards
- SL-C 002 build Bob DeNyse
- Side ported exhaust systems
- Any Chicago SL-C guys?
- Greetinga from Atlanta
- Yos' SLC Build Thread
- Forum Rules
- Keeping it Lite
- Venting gas tank
- owning an SL-C
- Surge Tank
- Pictures of caliper line connections?
- GM steering column hub question
- Alternator mounting?
- Centriod fuel sending units
- Australian build
- Hyd.front lift
- Thanks Jack!!....
- FRAN!!!! I need a longer wheelbase!
- Building a center dash display - feedback?
- AC system
- What little things?
- Sound Deadening
- Dean's SLC track test and tune
- First Impression in person on the SLC
- SL-C Owners Map
- Decisions Help when ordering SLC
- Traveling with SL-C
- Tow hook for the street?
- Shock settings
- Ricardo starter pigtail
- Group C - Spa Video
- Fran
- motor mounts
- Headlight?
- SLC Laptimes?
- Dash measurement request
- It's alive!!!!!!!!
- No power at fuel pump-help
- Hello everyone! New Guy in Florida
- SL-C build pic's needed
- SLC Insurance (Non-Replica)
- My Florida Orange
- What size master cylinders?
- ricardo trans oil cooler
- oil cooler mount pictures?
- Suggestion for a Sticky?
- RCR SLC door handles?
- Looking for SLC Interior pictures....
- AMG Engines
- SL-C length?
- Shifter thread pitch?
- An SLC "commercial"
- SL-C seat alternatives
- Radiator Placement
- Can I fit a supercharger in the engine bay? // answered thanks!
- Cabin width
- Who's SLC is this in NOVA???
- LS7 serpentine belt configuration
- Superlite Leman Questions
- Fasteners Nuts Bolts Fittings Question???
- Register car in Canada
- Which Griffin Transaxle Behind a LS376?
- Newbe Introduction
- intro and confirming budget for SLC build
- SL-C Brake rotors
- Lava mat heat shielding
- Tilton 600 series foot petals
- Window cut outs
- Ricardo throwout bearing
- Quick question: Size of brake & coolant lines?
- SLC Chassis Cart
- Digital TFT Gauge
- What do you guys know about these fuel pumps?
- ECU & other electronics mounting location
- SLC Mid Ohio
- Ricardo axle bolts
- Dean's SLC build thread
- Ricardo can't find reverse, Not running yet
- Ricardo Plugs Id'd
- Line Routing
- Setting up dbw throttle?
- Which battery to use?
- Any SLCs in Florida?
- Come on Dean Lampe....picture and story time
- Oil pans?
- 16 weeks to go...
- Koso Dash
- GM steering column wiring
- Digidash pro 2
- Newb gt40 vs SL-C
- Want to rent an SLC? No, really.
- Dashboard
- Brembo brake upgrade - thoughts?
- How do the windows work?
- Interesting chassis comparison
- Dallas, TX guys
- New guy, wants SLC.
- Semi-automatic?
- more G50 questions?
- Anyone going to the 25 hours at Thunderhill
- ricardo bolts
- street tail mounting
- What other forums do you visit?
- CA SB100 issues?
- Another engine choice question
- Build time estimates
- Electric SLC Article
- I have a few questions
- SLC at Thunderhill?
- Mid-Ohio
- Wiring
- SLC seat belts
- SLC Timeframe
- Pacman
- SL-C motorsports
- SLC picture thread
- Jay's build log
- SL-C ISIS utube
- Customer SLC
- Griffen transaxle bell housing, clutch pressure plate, flywheel, starter?
- Ricardo axle bolts
- What should I do with the dash?
- For Sale: SL-C Race Tail (original version)
- What do you think for a SL-C color?
- Poly mounts
- SL-C Build in MA
- forward or backward ?
- Setting up the transaxle shifter?
- Cooling setup
- SLC Build Thread-Chassis #53
- "Best" way to attach windshield and headlight covers
- SL-C chassis #53...it's official
- LS oil pan selection?
- Any SL-C in the UK
- SLC race lineup...
- S L C with 360 drivetrain
- SL-C #50 Allan's Build
- Big Block V8 In SLC Possible?
- The SLC Clubhouse
- SL-C builds
- Help Alex figure out if a carb will fit =)
- Ricardo hydraulic clutch hookup
- SLC 36 Cam's Build
- Doc's SL-C Build
- SL-C powerplant possibility?
- SLC 24 Howard Jones
- SLC 001 Build