Brett James-McCall
Moderator
I am getting rid of my old SIP Workshop Air Compressor. It's a 420/150 model. The simple reason is that I need something smaller, as with number 2 on the way I am being pressurised to actually put my son's bikes in the shed!!
The good and the bad... It works and works well and over the 8 years of having it it has performed faultlessly.
The not so good, it may need a new belt. The On/Off doesn't work, it stuck to on. I bought it like that but chose to just turn it off using a seperate remote switch. Also, one of the previous owners put an extra bottle on the compressor (see pic) he claimed it help smotth the air delivery - it hasn't affected me during the running of it.
It masure 135x40x90 cm (l/w/h)
Its heavy!! So if you want it, you will need two to unload at least... I would also recommend a flat and low load area i.e. no boot lips.
£75 ono. I am by the M25/A13 junction.
Thanks
Brett
The good and the bad... It works and works well and over the 8 years of having it it has performed faultlessly.
The not so good, it may need a new belt. The On/Off doesn't work, it stuck to on. I bought it like that but chose to just turn it off using a seperate remote switch. Also, one of the previous owners put an extra bottle on the compressor (see pic) he claimed it help smotth the air delivery - it hasn't affected me during the running of it.
It masure 135x40x90 cm (l/w/h)
Its heavy!! So if you want it, you will need two to unload at least... I would also recommend a flat and low load area i.e. no boot lips.
£75 ono. I am by the M25/A13 junction.
Thanks
Brett