FS AUS "V8 Archie" 6speed ls1/ls2/ls# fitting kit (all new)

Building a mid engined project car & find an in-line transaxle too expensive / complex for your project?? – do I have the kit for you!
I have a brand new V8 archie ls* adaptor kit. (www.v8archie.com).This kit was originally designed to fit the chev v8 into the pontiac fiero. It was later updated to suit the Alloy Ls* generation of v8's & the Pontiac f40 6 speed gearbox (this kit)

All items are brand new & have not even been fitted up. Kit consists of the following:
Pontiac f40 6 speed gearbox
Billet alloy adaptor ring
Starter motor & billet adaptor
Alloy flywheel, adaptor & heavy duty clutch
1/2 shaft with Ls* mounting
Pontiac G6 Lh & Rh driveshafts

f40-2_zps86464181.jpg


f40-3_zps741267e3.jpg


f40-1_zps7cd1477b.jpg


Here is what it would look like bolted to an ls3:

IMG_6078_zpscde5b4af.jpg


IMG_6077_zps28db3b34.jpg

IMG_6076_zps6c62a81b.jpg

& pics from v8archies web site showing ls3 setup on fiero subframe:
LSparts2_zps00731016.jpg

LSparts1_zpsa5e52d76.jpg

This kit will mount any Ls* generation of Chev v8 to the gearbox, allowing transverse (ie fwd type) fitment of the motor assembly into a "midi" or Toyota mr2 / Pontiac fiero / similar mid engined car
Basic Dimensions:
Gearbox to back face of block (inc the adaptor ring) 370mm

Back face of block to front of water pump pulley 660mm

Total width (inc spark plug leads etc) 600mm

Total height 700mm

Approx weight of motor & box - 260kg


Quaife makes an lsd to suit this gearbox

Kit was $Us5000, excluding the driveshafts & shipping (over $Au6,800 landed)

Was originally bought for a sw20 mr2 conversion that fell over

Sell massively under cost (was $5000) now $3,500

Pickup SE suburbs of Vic (Seaford) or can strap to a pallet & deliver to Dandenong E-Go depot

Toby 0437 66 55 18


 
Back
Top