While I await my Superformance MKI I'm building a new garage. I very carefully located the building and set the slab elevation with a laser level to give proper drainage to my existing driveway. Unfortunately, the concrete guys poured the apron at the wrong slope and I'm afraid the GT40 will either scrape its chin or bottom out as it enters the garage. I'm assuming a 95" wheelbase and just under 4" ground clearance, with a chin "scrape point" 26 inches forward of the front wheel centerline and 4" off the ground. If anyone can verify any of those dimensions I'd be grateful. I know these cars are all different, and I'm trying to get actual Superformance dimensions as I write this, but any info would help. Tearing out the apron would, of course, be the answer, but I don't look forward to the delay or the required finger-pointing exercise.