Would you guys share with me what size heim joints you are using for your control arms or the size of any spherical bearing if used. I'm thinking 1/2" is most common, but just curious.
-10 for lowers and -8/10 or -8 for uppers depending upon location....we only use Chromoly with Teflon lined casings as standard on all RCR/Superlitecars
Terry: Half inch also on mine, but with a 5/8" thread. they are much stronger and have a larger ball.
The chromoly joints with teflon liner are the way to go.
I use 1 1/4" radius rods with .080 wall much stronger and I think they look better.
Cheers
Phil
Thanks guys. I went with 5/8" (-10) lined chromoly all the way around, so if you guys are not seeing any issues (especially Fran), I should be in very good shape regarding any margin.