welcome to GT40s.com! If you've never posted on the forum maybe give it a go by introducing yourself in the Introduce Yourself Here forum. Also, think about becoming a Forum Supporter at GT40s.com. Becoming a supporter will allow you more PM space, an avatar, and the money is used to keep GT40s.com running.
Enjoy the forum!
Welcome to the GT40s.com, the World’s Largest GT40 resource.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, view pictures, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, Join Our Community Today!
Why not start with your first post today and become an active part of GT40s.com now! And, if you find you enjoy GT40s.com think about becoming a Forum Supporter.
GT40 Tech - Engines/Induction/ExhaustMotors and engine related - right here!
this is going to sound really stupid especially as i work in the motor trade but i've got to ask
i am in the process of rebuilding a 351w engine ready for my project due aug 2004 the block is bored 30 over the question i have is which balancer do i require 28/50 oz and any suggestions on whos make standard/fluid/race why.
the block is a d9 (79) i guess the crank is original just ground +10 on both the mains and big ends the flywheel i would like to use is an aluminium from a mustang 5.0 i think i purchased it from ebay.the more i've read into the 351w engine the more i'm starting to fear i may not be able to use the flywheel with said engine.has anybody any suggestions! i have not sorted clutch assm yet any thoughts i will be using tornados bellhousing for the ford to renault box with ford input shaft.
i,m sure i will be asking other questions as the gt40 community seems to be full of very interlectual people
sorry if their is already another thread about this but i tried serching but found nothing many thanks chris parker [img]/ubbthreads/images/graemlins/confused.gif[/img]
You need the 28 OZ balancer. I picked a nice fluid street unit from summit at a good price. Check you flywheel as most designated 5.0 are 50 OZ factor. A pre 1979 289, 302, 351 flywheel will work in your application as they are 28 OZ.
Linear Mode
