MK-I MK-II MK-III MK-IV GULF MIRAGE J-CAR LOLA
   | Notices | Hi member,
welcome to GT40s.com! If you've never posted on the forum maybe give it a go by introducing yourself in the Introduce Yourself Here forum. Also, think about becoming a Forum Supporter at GT40s.com. Becoming a supporter will allow you more PM space, an avatar, and the money is used to keep GT40s.com running.
Enjoy the forum!
Welcome to the GT40s.com, the World’s Largest GT40 resource.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, view pictures, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, Join Our Community Today!
Why not start with your first post today and become an active part of GT40s.com now! And, if you find you enjoy GT40s.com think about becoming a Forum Supporter. | | GT40 Tech - Engines/Induction/Exhaust Motors and engine related - right here! | 
02-25-08, 07:34 AM
|
#1 (permalink)
| | Brian Coombs Rookie 
Join Date: Apr 2007 Location: ireland GT40: kva/rml
Posts: 13
Rep Power: 2  | Flywheel Bolt Pattern/dimensions?
I am currently machining a new flywheel for my 302, does anyone know what the PCD dimensions are for a standard 28oz 302 flywheel? I know one of the holes is offset? but by how much?
Thanks,
BC | 
|  | |
02-25-08, 12:08 PM
|
#2 (permalink)
| | Jay P Rookie 
Join Date: Oct 2007 Location: California
Posts: 59
Rep Power: 2 | Re: Flywheel Bolt Pattern/dimensions?
Quote: |
I know one of the holes is offset? but by how much?
| It's not one hole that is offset, it's all of them. If the flywheel is not indexed correctly, all the holes will be off, except one. Some will be close, but not an exact match. | |
| | |
02-25-08, 12:26 PM
|
#3 (permalink)
| | Brian Coombs Rookie
Join Date: Apr 2007 Location: ireland GT40: kva/rml
Posts: 13
Rep Power: 2 | Re: Flywheel Bolt Pattern/dimensions?
Sorry John,
you have me confused... we are talking about the bolts that attach the flywheel to the crankshaft? if so I thought 5 of the 6 bolt holes were equally spaced and one was out of position? so you can only attach the flywheel in one place?
the question still stands, what is the PCD of these bolts and what is the position of the 6th bolt, the one that is not equally spaced? | |
| | |
02-25-08, 04:11 PM
|
#4 (permalink)
| | Russ Noble Lifetime Premier Supporter 
Join Date: Jul 2004 Location: Christchurch,NZ GT40: Building scratc
Posts: 1,436
Rep Power: 21 | Re: Flywheel Bolt Pattern/dimensions?
My 351 was spaced as you state Brian. Is the 302 bolt pattern the same as 351? (I haven't been around any Yank V8's long enough to know what's what yet  )
I think Lim will still have the info somewhere from when we built our 351 flywheels.
The other thing is that it will need to be indexed to your balance weight position. We used neutral balance so it didn't matter for us and I wont have that information.
Let me know if what I've got will be any use to you.
Last edited by Russ Noble; 02-25-08 at 04:18 PM.
| |
| | |
02-25-08, 04:59 PM
|
#5 (permalink)
| | flatchat 8 Tenths 
Join Date: Dec 2002 Location: Warwick,Qld, Au
Posts: 800
Rep Power: 15 | Re: Flywheel Bolt Pattern/dimensions?
6 holes to suit 7/16" bolts on 3" PCD ---One hole at 64 deg (ie 60,60,60,60,56,64 ) approx. opp the counterweight looking from the clutch side of the flywheel.
---secret info , hope this helps 
__________________
Ex:- DRB # 17
(GT40 australia)
Our Ford which art in heaven
Hallowed be thy frame.
Now, an Ally mono tub
RCR 70 spyder with a
CHEVY LS6 -- 930 trans
Forever young ! | |
| | |
02-25-08, 05:29 PM
|
#6 (permalink)
| | jac mac 10 tenths
Join Date: Dec 2005 Location: Gore N.Z.
Posts: 1,761
Rep Power: 23 | Re: Flywheel Bolt Pattern/dimensions?
221/260/289/302/351/400/ windsor/cleveland/ & 351/400 m series all share same flywheel bolt pattern along with 200/250 aust 6cyl and 240/300 USA 6cyl and if your looking for a 'small' dia flex plate to sandwich between your tilton clutch assy & flywheel the Aussie HOLDEN 202 auto flexplate has the same bolt pcd BUT the 'odd' bolt is staggered in the wrong direction (RF fixable )  | 
| | |
02-26-08, 04:56 AM
|
#7 (permalink)
| | Brian Coombs Rookie
Join Date: Apr 2007 Location: ireland GT40: kva/rml
Posts: 13
Rep Power: 2 | Re: Flywheel Bolt Pattern/dimensions?
Thanks everybody,
It never ceases to amaze me the information people keep in their heads….
thanks again
BC | |
| | |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | | | | Thread Tools | | | | Display Modes |  Linear Mode | | 
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts
HTML code is On | | |
All times are GMT -4. The time now is 06:09 AM.
 |
