Ht Leads covers/Jackets

Does anyone have any recommendations regarding covering HT leads. mine are close to the headers and I am worried about them melting (when I finally ever get the engine started LOL)

Do these look OK? [ame]http://www.amazon.co.uk/Exhaust-Protector-Thermo-Shield-Protection/dp/B00QKSXH9C/ref=sr_1_2?ie=UTF8&qid=1434978383&sr=8-2&keywords=spark+plug+cover+high+temperature[/ame]
 

Randy V

Moderator-Admin
Staff member
Admin
Lifetime Supporter
I've never run that brand, but have used these:
[ame]http://www.amazon.co.uk/010544-Protect---Boot-Titanium-Protector/dp/B00TQ3NIZG/ref=sr_1_2?s=automotive&ie=UTF8&qid=1434992774&sr=1-2&keywords=Dei+spark+plug[/ame]

And they worked very well...

My current set of wires is quite long with 90 degree boots and will be routed under the headers.. If I need to use the shields again, I will.. They can be a bit troublesome to install on 90 degree boots but a Zip-Tie keeps them in place when placed over the secondary lead and pulled tight.
 
Back
Top