Kim Haun
Supporter
The stainless steel bundle of snakes I received with the RCR GT40 project I purchased turned out not to fit the car. Everything is too high and too wide to fit under the fiberglass rear clip. I'm in the re-design stage of re-working the exhaust and am looking for opinions on what clearances are necessary from the fiberglass clip and from the transaxle. I'm running a G50-52 transaxle which sits pretty high and right now it looks like I'll have in places less than 1/2" clearance from the collectors to the ribs of the tranny...too tight? I'm not sure what else to do as room is at a premium. Also, the pipes, right now are running anywhere from 33" to 40" in length. Is there a basic rule for pipe length or difference in pipe length in making a crossover system? This is going to be a very tricky project...I've never attempted to tackle this complicated of an exhaust modification. I plan to cut, fit and tack and have a pro do the tig welding. Any other tips to make this go smoothly will be met enthusiastically!
Thanks!
Kim
Thanks!
Kim