MK-I MK-II MK-III MK-IV GULF MIRAGE J-CAR LOLA
   | Notices | Hi member,
welcome to GT40s.com! If you've never posted on the forum maybe give it a go by introducing yourself in the Introduce Yourself Here forum. Also, think about becoming a Forum Supporter at GT40s.com. Becoming a supporter will allow you more PM space, an avatar, and the money is used to keep GT40s.com running.
Enjoy the forum!
Welcome to the GT40s.com, the World’s Largest GT40 resource.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, view pictures, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, Join Our Community Today!
Why not start with your first post today and become an active part of GT40s.com now! And, if you find you enjoy GT40s.com think about becoming a Forum Supporter. | | GT40 Tech - Exterior, Interior, AC, & Trim All that other stuff not in categories above. | 
04-15-08, 07:11 AM
|
#1 (permalink)
| | MGNut Bronze Supporter
Join Date: Nov 2003 Location: Tavistock, Devo GT40: C type MK1 KVA
Posts: 367
Rep Power: 8  | Rear Bulkhead window
Hi there, can anyone give me some sizes for the rear window.
I am getting a roll cage fitted as we speak and the rear brace bars will only fit through, on the sides of the window aperture. I have a KVA and I would appreciate some pictures and fitting methods if poss.
Thanks
__________________
Regards
Murray
------
KVA. C Type chassis, part built by previous owners. In the garage, just getting started.
Standard 302
Gulf colours
1955 MG ZA Magnette.
Black and Chrome
Minilites | 
|  | |
04-15-08, 03:33 PM
|
#2 (permalink)
| | Julian West 7 Tenths
Join Date: Dec 2001 Location: Devon, UK GT40: GTD
Posts: 749
Rep Power: 14 | Re: Rear Bulkhead window
Hi Murray,
My bulkhead window is approximately 860mm wide by 170mm high at the widest points, inc the rubber. I've attatched the best picture I could find, showing where my roll cage exits either side of the window. Hope this helps, let me know if I can help with any more pics etc,,,,
Regds, | |
| | |
04-15-08, 04:45 PM
|
#3 (permalink)
| | andy l Rookie
Join Date: Mar 2007 Location: plymouth uk GT40: RCR MK 1
Posts: 41
Rep Power: 2 | Re: Rear Bulkhead window
Hi Murray
can get pattern off mine if you want, Andy 
__________________ Dax De-Dion 383 Chevy 450hp
RCR GT40 MK1 ARRIVED  | |
| | |
04-16-08, 03:05 PM
|
#4 (permalink)
| | MGNut Bronze Supporter
Join Date: Nov 2003 Location: Tavistock, Devo GT40: C type MK1 KVA
Posts: 367
Rep Power: 8 | Re: Rear Bulkhead window
Hello Julian, thanks for the measurements, that will help.
Andy, good call mate, I need to template the fuel filler holes too, shall give you a call when I have some time to get in.
Thanks to you both.
Cheers
__________________
Regards
Murray
------
KVA. C Type chassis, part built by previous owners. In the garage, just getting started.
Standard 302
Gulf colours
1955 MG ZA Magnette.
Black and Chrome
Minilites | |
| | |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | | | | Thread Tools | | | | Display Modes |  Linear Mode | | 
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts
HTML code is On | | |
All times are GMT -4. The time now is 04:44 AM.
 |
