Internal Eyebrows and Door Strikers...

[Graham]

Hi guys,

I need to get hold of some internal eyebrows for the doors as I'm close to sanding and would like to do this with all fittings done to mirror the final closure. I should mention that I don't have a full rollcage if this makes a difference.
Likewise I need some door strikers as I don't have these either...

Can anyone help, or point me in the right direction??

Thanks muchly guys!!

Graham

 

[Ian Anderson]

The internal door "eybrow" replacements I believe you can get from Mudgey on this forum

The door locks and strikers are BL Mini

Ian

 

[Graham]

Ian,

Any idea as to how I can get in touch with Mudgey?

Cheers pal,

Graham.

P.S got the seats fitted OK?

 

[Brett James-McCall]

Graham,
Will the eyebrows pass IVA...?

You can get Adam here: http://www.gt40s.com/forum/members/mudgey.html

Brett

 

[Graham]

This is the type of door striker that i need: -

(Thanks to Chuck for the picture).

Cheers,

Graham.

 

[Graham]

Graham,
Will the eyebrows pass IVA...?

You can get Adam here: http://www.gt40s.com/forum/members/mudgey.html

Brett

Hi Brett,

I'll take them off for IVA if it's an issue.

Thanks for the link!

Graham.

 

[Ian Anderson]

Ian,



P.S got the seats fitted OK?

Fitted fine - had to redo the access panel in the firewall - still needs some work as it scraped against the nose of waterpump pulley under hard acceleration going to Stoneleigh

They certainly are pretty comfortable!

Thanks

Ian

 

[Brett James-McCall]

Graham,
Try these: https://www.europaspares.com/BRIGHTWORK/HINGES_and_LATCHES/STRIKER_PIN___9_00425__1816.html

Brett

 

[Graham T]

Graham ,

I have a pair you can have for nothing if you send me private mail with your address.

Graham @ GTA.

 

[EGLITOM]

Graham

check here

http://www.gt40s.com/forum/vendor-m...top-retainers-available-again.html#post259077

Also check Keith´s post he has used them as well and is very happy with them.

http://www.gt40s.com/forum/gt40-build-logs/25274-keiths-rcr-gt40-mk-i-build-12.html#post283993

TOM

 

[Graham]

Graham,
Try these: https://www.europaspares.com/BRIGHTWORK/HINGES_and_LATCHES/STRIKER_PIN___9_00425__1816.html

Brett

Hi Brett, thanks for the link. I bought a pair (£18 quid, robbing b*stards). They are a tad to0 big, but I can easily reduce the circumference.

Thanks again.

Graham.