Front paneling around the filler cap etc?

[Robin Little]

Guys. I am struggling a bit with the panelling on the front of my KVA around the fuel filler caps and into the front of the windscreen area. I have been putting it off for ages but really need to get it done now. Has anybody got any pictures from around that area? needs to be watertight but aesthetically pleasing!! any advice or photos from a KVA?

Thanks

 

[Paulbav]

Just done mine it you look at my build thread, southern gt but may be similar?

 

[Brett James-McCall]

Robin, same as Paul, look at my build thread.

However, just a few reminders

1/ Remember the fuel area has to be sealed off, so design it to ensure you still can get access to the filler hose etc

2/ with the above, I think you also need to ensure that fuel can't run into the front clip area. So you'll need to do that on the panelling side or the clip itself.

Brett

 

[Robin Little]

Both your cars are progressing well.

Don't think there can be any cars that are the same as everyone goes about things completely different.

First attempt. Panelling needs tidying up and cleaned/polished but trying to enclose the full area.

Comments please?

 

[Mike Pass]

Just found these KVA pics which may be useful.
Cheers
Mike

 

[Robin Little]

Thanks for the pictures has given me some other ideas

Cheers